FAHD 5. SE2.6 - SE3.2 - SE3.8 EVO

Technical data: SE2.6 EVO SE3.2 EVO SE3.8 EVO Dimensions of carriage mm 2600x400 mm 3200x400 mm 3800x400 Plan dimensions mm 650x1100 mm 650x1100 mm 650x1100 Square frame dimensions mm 640x1190 mm 640x1400 mm 640x1400 Saw blade/hole diameter mm 400/30 mm 400/30 mm 400/30 Cutting height with blade Ø 300 mm at 90°/45° mm 80/58 mm 80/58 mm 80/58 Cutting height with blade Ø 400 mm at 90°/45° mm 130/93 mm 130/93 mm 130/93 Diameter of the saw blade/ hole mm 120/20 mm 120/20 mm 120/20 Engraver blade speed rpm 7500 rpm 7500 rpm 7500 Engraver motor power HP 1 HP 1 HP 1 Cutting width 1250 mm 1250 mm 1250 mm Variable saw blade speed from 2800 to 5600 rpm from 2800 to 5600 rpm from 2800 to 5600 rpm Motor power HP 7.5 HP 7.5 HP 7.5 Machine weight kg 730 800 kg kg 840 Machine equipment CE: - Tilt and lift group for powered blade operated by VK3 control panel: - Manual or automatic positioning of lifting and blade tilt - Saw blade speed selection (function linked to mounted blade ø) - Reading system on encoder - Automatic axis calibration - Widia type blade - Blade protection type suspended “CX 400” - Frame with square references for squaring rod Inclination angle display - Shelf extensions - Device for angular cuts - Eccentric lever press - 2 suction ports (1 x ø 120mm, 1 x ø 80mm) - Motor startup and stop managed by inverter - Engraving group with independent motor (Scroll, height and translation on linear guides, manual input)