FAHD 6. SE3.2 - SE3.8 PRO

Technical data: SE3.2 PRO SE3.8 PRO Dimensions of carriage mm 3200x400 mm 3800x400 Plan dimensions mm 670x1250 mm 670x1250 Square frame dimensions mm 640x1400 mm 640x1400 Saw blade/hole diameter without scorer mm 550/30 mm 550/30 Saw blade/hole diameter mm 500/30 mm 500/30 Cutting height with blade Ø 500/550 mm at 90° mm 175/200 mm 175/200 Cutting height with blade Ø 500/550 mm at 45° mm 120/140 mm 120/140 Diameter of the saw blade/ hole mm 125/20 mm 125/20 Engraver blade speed rpm 7500 rpm 7500 Engraver motor power HP 1 HP 1 Cutting width 1250 mm 1250 mm Variable saw blade speed managed by control panel from rpm 2500 to 5000 from rpm 2500 to 5000 Motor power HP 7.5 HP 7.5 Machine weight kg 1190 kg 1320 Machine equipment CE: - Tilt and lift group for powered blade operated by VK3 control panel: - Manual or automatic positioning of lifting and blade tilt - Saw blade speed selection (function linked to mounted blade ø) - Reading system on encoder - Automatic axis calibration - Engraving group with independent motor with pneumatic insertion - The engraving blade only lifts with the engraving motor on - Widia type blade Suspended blade protection CX 550 - Plan extensions - Device for angular cuts - Eccentric lever press - Motor startup and stop managed by inverter - Squaring frame with datum references for blade inclination - Nr.2 suction mouths (nr.1 Ø 120 mm, nr.1 Ø 100 mm)